Skip to content
Torque Tools Wrench — Premium tools. Trusted brands.

Torque Wrench Calibration Service – Jaipur & Delhi

Torque Tools Wrench offers torque wrench calibration from its Jaipur and Delhi offices, with a calibration report or certificate for your records. Send wrenches by courier, or contact us to plan a larger batch. ISO 6789-2 suggests recalibrating every 12 months or 5,000 cycles, whichever comes first, and after any overload, drop or repair.

Industrial areas in Torque wrench calibration we deliver to

  • Jaipur
  • Delhi
  • Delhi NCR
  • Rajasthan
  • Haryana
  • Punjab
  • Uttar Pradesh
  • PAN-India by courier

Torque tools we supply

Popular torque wrenches

View all →

Why torque wrenches need calibration

A torque wrench is a measuring instrument. Its spring, ratchet and release mechanism wear with use, and a wrench that clicks at the wrong value gives no warning: the joint looks tight but is under- or over-tensioned. On an assembly line that can mean loose fasteners, stripped threads or failed audits. Calibration compares the wrench's output with a reference and shows whether it still reads within tolerance.

What ISO 6789 says

ISO 6789 is the international standard for hand torque tools.

  • ISO 6789-1 sets the permissible deviation. For click-type wrenches the limit is ±4% above 10 Nm and ±6% at or below 10 Nm.
  • ISO 6789-2 sets the calibration interval: every 12 months or 5,000 cycles, whichever comes first.
  • A wrench should also be recalibrated after an overload, a drop or a repair, even if it is inside its interval.

When to recalibrate

Situation What to do
12 months since the last calibration Recalibrate
About 5,000 tightening cycles since the last calibration Recalibrate, even if under 12 months
Wrench was dropped Take it out of use and recalibrate
Wrench was used beyond its maximum (overload) Recalibrate before the next job
Wrench was repaired or had parts replaced Recalibrate before returning it to use
Readings disagree with a second wrench or joint checks Recalibrate and check both wrenches

Plants with high-use wrenches on a line usually reach 5,000 cycles well before 12 months, so it helps to count cycles, not just dates.

What we check

When your wrenches arrive, we inspect them and check their output against a reference across their working range. We look at the condition of the square drive, ratchet and scale, and note anything that affects the result. You receive a calibration report or certificate with the readings for each wrench. Certificate formats differ, so tell us what your auditor or customer needs to see and we will confirm the certificate details before you send the wrenches.

We work with click, digital and dial torque wrenches, and can discuss torque screwdrivers and torque multipliers. Ask us about other torque tools.

How to send your wrenches

  1. Contact us first through the contact page or by phone on +91 90090 07875 or +91 97825 45078, Monday to Saturday, 10 am to 5 pm. We will tell you which office to send them to and the current turnaround.
  2. Send them by courier, packed in their cases with the wrench set to its lowest setting. Send them to us by courier, or contact us to discuss collection for larger batches from one plant.
  3. Receive them back with the calibration report.

What to tell us

Include these details with your request so we can quote accurately:

  • Make and model of each wrench
  • Torque range and drive size
  • Quantity, and whether all wrenches can be sent together
  • Certificate needs: what your quality system or auditor requires on the report
  • Due dates if a recall or audit is scheduled

For multiple sites or a regular cycle, send the full list through the bulk quote form.

Torque wrench with calibration

If you are buying a new wrench rather than checking an old one, tell us at the time of ordering that you need a calibration report with it. We will confirm what we can supply for that model. Browse click torque wrenches and digital torque wrenches from TOPTUL, DreBon, Tohnichi and Wera.

Calibration in Jaipur and Delhi

Buyers in and around Jaipur can contact our Jaipur office, and buyers in Delhi NCR can contact our Delhi office. Plants elsewhere in India can send wrenches by courier after contacting us.

Torque Wrench Calibration Service: frequently asked questions

How often should a torque wrench be calibrated?

ISO 6789-2 sets the interval at 12 months or 5,000 cycles, whichever comes first. Recalibrate sooner after an overload, a drop or a repair.

What accuracy should a click torque wrench hold?

Under ISO 6789-1, a click-type wrench should be within ±4% of the set value above 10 Nm, and within ±6% at or below 10 Nm.

Do you provide a calibration certificate?

Yes. Each calibrated wrench comes with a calibration report or certificate. Tell us what your auditor needs on the certificate and we will confirm the details before you send the wrenches.

How long does torque wrench calibration take?

Turnaround depends on the quantity and the current workload. Contact us with your list and we will tell you the current turnaround.

Can you collect wrenches from our plant?

Send the wrenches to us by courier after contacting us with the make, model, range and quantity. For a larger batch from one plant, get in touch to discuss collection and the best way to send them.

What details should I send with a calibration request?

The make, model, torque range and quantity of the wrenches, plus what your certificate must show. Due dates for audits help us plan.

Can I buy a new torque wrench with calibration?

Tell us when you order or request a quote that you need a calibration report with the new wrench, and we will confirm what we can supply for that model.

Also serving

Get deals in your inbox

New launches, price drops and exclusive offers. No spam.

Get the best price

Send your requirement and we call or WhatsApp you back with a quote, usually the same working day.

Or WhatsApp us on +91 90090 07875 · call +91 90090 07875